FREE SHIPPING* ON ALL ORDERS OVER $150 USD OR $250 CAD *some exceptions apply
FREE SHIPPING* ON ALL ORDERS OVER $150 USD OR $250 CAD *some exceptions apply
2007-2012 BMW 135i/335i/X1 N54 & N55 Performance Intercooler Upgrade Kit
Replace your overheated factory intercooler with the VRSF upgraded intercooler kit to get the most out of your N54/N55. We designed this kit to be one of the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Our intercoolers allow for higher HP gains, mainly due to their ability to keep intake temps down while preventing heat soak which is a common problem with the factory intercooler. This results in a more power and increased reliability with reduced chances of pre-detonation & knock.
The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. Once boost levels and air flow are increased, the OEM unit is easily overwhelmed and can not keep up with the cooling demands of a tune running more than OEM boost levels. This results in heat soak which will result in a power loss and a higher potential for pre-detonation in the upper RPM range.
We remedy this problem with our custom bar and plate core designs which utilizes a staggered and offset high density internal and external fin pack. Our cores have been carefully tuned to provide the the best intake temperature reduction while maintaining minimal pressure drop. Our bar & plate core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris.
The VRSF 5" Stepped HD, 7" HD and 7.5" Stepped HD Intercoolers are the most cost effective options to lower intake temps on a full bolt on car without compromise. With the 5" Stepped HD intercooler you can expect to see a 4 degree rise during a 3rd gear pull on the stock turbos. The 7" Performance HD will show a drop in starting intake temp due to the overall increase in heat absorption and dissipation. In comparison, the OEM intercooler rises about 32 degrees during the same 3rd gear pull. If you're upgrading turbos, our new 7.5" HD Stepped Competition HD has been proven to support up to 850whp throughout a 3rd gear pull with only a 2 degree rise in intake temperatures The VRSF 7.5" HD Competition Intercooler is comprised of a much denser fin pack both internally and externally. It's not uncommon to see intake temperatures drop at the end of a 2 - 4 gear pull due to the Competition HDs larger overall surface area. You can expect to see an intake temperature reduction on a stock turbo, full bolt on car during a 3rd gear pull which is why we recommend the Competition HD over the regular Performance intercooler if your budget allows. For anyone looking to run larger upgraded turbos above 850whp, we recommend our 7.5" Race core.
Our 7" FMIC has been involved in many record breaking builds and is currently featured on the current world's highest horsepower N54 @ 861WHP.
Finish & Construction
Our VRSF intercooler features 3D CAD designed cast aluminum end tanks for improved flow in comparison to sheet metal end tanks. Our one piece seamless cast end tanks are also more durable than comparable sheet metal or multiple piece end tanks. Every VRSF intercooler is finished in a beautiful, uniform, bright silver coating which helps protect the intercooler from corrosion and ensures your VRSF intercooler holds up to the elements, no matter where you live.
Every VRSF product includes our lifetime warranty & our No Hassle satisfaction guarantee which includes fitment & defects.
Both VRSF intercoolers feature tabs that allow the retention of the factory fan shroud. We also include additional mounting hardware for extra support. We include everything required to replace the OEM intercooler, including custom molded couplers and stainless steel t-bolt clamps necessary for installation.
The 5" stepped core unit does not require trimming of the black plastic shroud (minimal trimming may be required on some models) . The 7" Performance HD and 7.5" Stepped Competition HD intercoolers require trimming of the black plastic shroud behind the bumper. The bumper does not require trimming with either models. Each VRSF intercooler is hand finished and pressure tested to ensure a high quality, leak free experience. Our intercoolers fit both Left Hand Drive (LHD) & Right Hand Drive (RHD) Models as well as all XI models.
High Density Bar & Plate Core
Cast Aluminum End Tanks
Easy install, less than 2.5 hours
Includes lower charge pipe
Includes lifetime warranty
Fits the following BMWs
2007-2013 E90/E91/E92/E93 BMW 335i/xi
2011-2013 E92 BMW 335is
2008-2013 E82 BMW 135i
2012-2015 E84 BMW X1 35i
Tracking will be sent once it leaves our warehouse.
For Canadian shipments, if the item is at a US address, the item needs to be brought into our Winnipeg warranty prior to shipping out to the destination.
Tracking information will be received once it leaves Winnipeg.
Please note, average turn around time for this is roughly 2 weeks, if the product is in stock.
Absolutely NO refunds/exchanges on special order items. If return of a non special order item is requested, customer must pay shipping and it must be requested within 14 days of purchase.
Any orders not picked up by the customer within 15 days after notification of arrival becomes property of OSS Motorsport Ltd. no credit or refund will be given.
Customers that remove product(s) from OSS Motorsport will have been deemed to agree with all of the above terms and conditions. All items sold are for Off Road Use Only.
Unwanted items are subject to a 20% restocking fee, in addition to the return shipping to our warehouse(if applicable)
All Electronics are final sale!
Please have your mail box or junk mail box checked for status updates.
Shipments, returns & refund
During the payment process, we provide delivery options with different delivery companies with which we have no contractual relationship. We offer commission free this added service so the client can receive its order without having to round trip to our warehouse. If there is any problem with the delivery, it is the consignee responsibility to contact the delivery company he/she dealt with directly. The carrier provide a limited insurance of 100$. If you need more, please contact us prior to purchase as we will get you the quotation for extra insurance from the carrier you will select.
NO return accepted. Exchange upon approval and proof of factory default.
Partial or full refund requests are subject to 5% administrative fees. Refund is immediately issued upon cancellation and a confirmation email is sent. However, depending on the payment method used, it may take one (1) to ten (10) days for the refund to appear in client account.
Special orders are non-refundable.
United States orders may be subject to Custom fees and tax as we ship from Canada.
Some products may be used for off-road only. Customer is responsible to check with his/her local/state laws and ordinances.
We are not responsible if the client ordered the wrong item, which does not work on its vehicle.
All parts required professional installation, there is no return or exchange if the client does not know how to install it him/herself.
OSS Motorsport is not responsible for defective or damage caused by unprofessional installation or misuse of the product.
We are committed to the privacy of the client's information. OSS Motorsport does not, and will not, distribute, disclose or sell any of the client's personal information to third parties, other than as required by law or as necessary to process a payment. During the process of providing payment information, client may be asked to provide his/her name, address, e-mail, phone number, and where payment is concerned, credit card number, billing address, security code and expiration date. When users access our site, we may automatically collects information, including IP addresses and information regarding the client use of the site through cookies or automatic registration and maintenance of the client contacts to us and preferences.
Questions about the Terms of Service should be sent to us at firstname.lastname@example.org.