Performance Throttle Body for 2006-2013 DISI MZR Mazdaspeed

Performance Throttle Body for 2006-2013 DISI MZR Mazdaspeed

Corksport SKU: GEN-6-497-10
Correct Silicone Shown Below
Price
Regular price $329.99 USD
Regular price Sale price $329.99 USD
Save
/
  • In stock, ready to ship
  • Backordered, shipping soon
  • Inventory above may reflect inventory in a Canadian or US warehouse, please contact us for a proper ETA
  • Price Match Guarantee - Found a better price? Show us!
  • Canadian and Prefer to pay a 50% Deposit? Please contact us by email or phone to get a deposit placed!
Shipping calculated at checkout.

The CorkSport Throttle Body for Mazdaspeed 3, Mazdaspeed 6, and Mazda CX-7

Introducing the first and only performance throttle body for the MZR DISI that offers no
sacrifices.

By taking a ground-up approach we were able to succeed in making a throttle body that performs better than OE while retaining OE fitment and daily drivability. With easy installation and drop in fitment, you are sure to enjoy the gains from the CorkSport Throttle Body.

Share your performance review with the CorkSport community once installed! with #CorkSport

Check out the video and installation instructions below for more info.

 


The CorkSport Advantage

Mazdaspeed 3 throttle body

Ground Up Approach

Instead of trying to enlarge an OE throttle body or adapting to a different vehicle’s throttle body to work, we started this project from the ground up. This gave us complete design freedom to make the best throttle body possible. The CorkSport Throttle Body uses 100% brand new parts. The body is an aluminum investment casting that was made precisely to our CAD optimized specifications. Coupled with new electronics that are based on the OE logic, the CS throttle body is truly a full OE replacement.


Mazdaspeed 6 throttle body

Design Focused

The CorkSport Throttle Body increases the throttle plate diameter from 60mm to 72mm to allow for the maximum flow that can be achieved with the OE bolt pattern. This may not sound like a very large increase, but the stock throttle body opening fits inside the CS Throttle Body opening with plenty of room! To further help with flow, the face of the throttle plate is flat. By using a D-shaped center pivot, the airflow does not have to go around a bump right in the center of the throttle plate. Plus, this design has been endurance tested to ensure that it will stand up to the test of time.


performance speed 3 72mm throttle body

Easy Installation

By sticking to 72mm, the OE bolt pattern could be retained. That means the install stays simple and does away with any need for special adapter plates or a different intake manifold. It has been test-fitted and proven to work on OE, CorkSport, and JMF intake manifolds. 72mm is also the optimum size for versatility between 2.5"; and 3"; intercooler piping so it will fit almost any TMIC or FMIC setup. As a final touch, an O-ring groove is machined into the body with an included O-ring so you do not need to re-use the OE gasket (it's too small for the 72mm opening anyway). Don't worry though; the O-ring is safe with oil, gas, methanol, ethanol, and other chemicals that may find a home in your engine.


Mazdaspeed bolt in bigger throttle body

Tested and Proven

We have extensively tested the CorkSport Throttle Body and have found that it flows about 150CFM more than OE when the throttle body is 75% open (which is 100% accelerator). This is about a 33% increase over the stock throttle body. That is all well and good but what does it mean? In daily driving, we noticed better response with no CEL or choppiness. When testing for power on a midsize turbo (GT30 size), we primarily noticed that the turbo was spooling at a lower RPM. When we moved to a big turbo (GT35R or larger) we saw 100-200RPM lower spooling and an increase in midrange power.

Mazdaspeed upgraded throttle body dyno results

Checkout the dyno graph to see for yourself, blue is the CS throttle body, green is the OE throttle body. Note: there were no changes other than adding the CorkSport Throttle Body.


Bigger Mazdaspeed 3 throttle body

Hardware and Accessories

Each CorkSport Throttle Body comes with everything you should need for installation. Aside from the TB itself, every unit comes with stainless steel mounting hardware and a 3"; stainless steel t-bolt clamp to attach the throttle body to the silicone piping. You also get to choose whatever silicone will work best for your application. This includes:

        • 3"; straight and 3” to 2.5” straight couplers for front mount intercooler setups.
        • 3"; to 2.75” elbow for Mazdaspeed 3 and Mazda CX-7 top mount intercooler setups.
        • 3"; to 2.75"; straight coupler for Mazdaspeed 6 top mount intercooler setups.

.


Additional Features

    • Vehicle Fitment:2007-2013 Mazdaspeed 3, 2006-2007 Mazdaspeed 6, 2007-2012 Mazda CX-7
    • Designed in America: Designed in Vancouver, Washington, in the Pacific Northwest.
    • CorkSport Service & Support: Receive a 2-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support at (360)260-2675.

Advisory

  • The CorkSport Throttle Body does not retain the OE throttle body coolant ports. This does not cause any adverse effects; however, the coolant lines will need to be rerouted upon installation.
  • The CorkSport Throttle Body has not been test-fitted with every single aftermarket intake manifold and intercooler piping option on the market. Fitment may vary.
  • The CorkSport Throttle Body has been test-fitted with ONLY the CorkSport throttle body spacer. Fitment may vary with other throttle body spacers.
  • The CorkSport Throttle Body can be installed with no tuning, however, to ensure optimum performance and engine health, a tune after installation is recommended.

How To Install Your CorkSport Mazdaspeed Throttle Body

It will take you one hour to install the CorkSport Mazdaspeed Throttle Body with our easy-to-use instructions.

 

1 Hour Install Time

1 Hour Install Time

 
Difficulty: 3/5

3/5 Difficulty

 
2-Year Warranty

2-Year Warranty

 
No CEL

No CEL

Tracking will be sent once it leaves our warehouse.

For Canadian shipments, if the item is at a US address, the item needs to be brought into our Winnipeg warranty prior to shipping out to the destination.

Tracking information will be received once it leaves Winnipeg.

Please note, average turn around time for this is roughly 2 weeks, if the product is in stock.

Absolutely NO refunds/exchanges on special order items. If return of a non special order item is requested, customer must pay shipping and it must be requested within 14 days of purchase. 

Any orders not picked up by the customer within 15 days after notification of arrival becomes property of OSS Motorsport Ltd. no credit or refund will be given.

Customers that remove product(s) from OSS Motorsport will have been deemed to agree with all of the above terms and conditions. All items sold are for Off Road Use Only.

All performance modifications are done at your own risk and may void your warranty.

UNWANTED ITEMS

Unwanted items are subject to a 20% restocking fee, in addition to the return shipping to our warehouse(if applicable). Used items cannot be returned.

Electronics

All Electronics are final sale!

TERMS AND CONDITIONS

Please have your mail box or junk mail box checked for status updates.

Shipments, returns & refund

During the payment process, we provide delivery options with different delivery companies with which we have no contractual relationship. We offer commission free this added service so the client can receive its order without having to round trip to our warehouse. If there is any problem with the delivery, it is the consignee responsibility to contact the delivery company he/she dealt with directly. The carrier provide a limited insurance of 100$. If you need more, please contact us prior to purchase as we will get you the quotation for extra insurance from the carrier you will select.

NO return accepted. Exchange upon approval and proof of factory default.

Partial or full refund requests are subject to 5% administrative fees. Refund is immediately issued upon cancellation and a confirmation email is sent. However, depending on the payment method used, it may take one (1) to ten (10) days for the refund to appear in client account.

Special orders are non-refundable.

United States orders may be subject to Custom fees and tax as we ship from Canada. 

Disclaimers:

Some products may be used for off-road only. Customer is responsible to check with his/her local/state laws and ordinances.

We are not responsible if the client ordered the wrong item, which does not work on its vehicle.

All parts required professional installation, there is no return or exchange if the client does not know how to install it him/herself.

OSS Motorsport is not responsible for defective or damage caused by unprofessional installation or misuse of the product.

Privacy Policy

We are committed to the privacy of the client's information. OSS Motorsport does not, and will not, distribute, disclose or sell any of the client's personal information to third parties, other than as required by law or as necessary to process a payment. During the process of providing payment information, client may be asked to provide his/her name, address, e-mail, phone number, and where payment is concerned, credit card number, billing address, security code and expiration date.  When users access our site, we may automatically collects information, including IP addresses and information regarding the client use of the site through cookies or automatic registration and maintenance of the client contacts to us and preferences.

Questions about the Terms of Service should be sent to us at info@oss-motorsport.com.

 

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like
Recently viewed